Duplex water softener with two electronic control units

System ready for connection for the production of softened water with a residual hardness of approx. 0.1° dH, duplex unit for uninterrupted supply, including two electronic volume-controlled central control valves, two GRP cartridges, brine tank, brine valve and water meter.
Max. flow rate (m³/h) |
1,0 | 1,5 | 2,0 | 3,5 | 4,0 |
Flow rate at < 0.1° dH* (m³/h) |
0,6 |
1,0 | 2,0 | 3,0 | 4,0 |
Max. capacity (m³ x °dH) |
60 | 100 | 200 | 300 | 400 |
Salt consumption (kg/reg.) |
3,6 |
6,0 | 12,0 | 18,0 | 24,0 |
Brine stock (approx.) (kg) |
100 |
80 | 180 | 140 | 260 |
Operating pressure (bar) |
2.5 - 6 |
||||
Inlet (male thread)/Outlet (male thread) |
1" | ||||
Wastewater (male thread) |
¼" | ||||
Electrical connection (V/Hz) |
230/50 - 10 W |
||||
Width (mm) |
1.200 | 1.300 | 1.400 | 1.500 | 1.800 |
Height (mm) |
500 |
500 | 600 | 800 | 800 |
Depth (mm) |
1.300 | 1.300 | 1.800 | 1.800 | 2.300 |
Item No. |
197277 |
197278 |
197279 |
197280 |
197281 |
Duplex water softener MC-N |
60-2 C |
100-2 C |
200-2 C |
300-2 C |
400-2 C |
Duplex softener MC-N |
500-2 C | 600-2 C | 800-2 C | 1000-2 C | 1400-2 C |
Max. flow rate (m³/h) |
6,0 | 7,5 | 10,0 | 12,5 | 14,0 |
Flow rate at < 0.1° dH (m³/h) |
5,0 | 6,0 | 8,0 | 10,0 | 14,0 |
Max. capacity (m³ x °dH) |
500 | 600 | 800 | 1000 | 1400 |
Salt consumption (kg/reg.) |
30,0 | 36,0 |
48,0 |
60,0 | 84,0 |
Brine stock (approx.) (kg) |
250 | 220 | 400 | 350 | 550 |
Operating pressure (bar) |
2,5 - 6 | ||||
Inlet (male thread)/Outlet (male thread) |
1,5" | 1,5" | 1,5" | 2" | 2" |
Wastewater (female thread) | 1 ¼" | 1 ¼" | 1 ¼" | 2" |
2" |
Electrical connection (V/Hz) |
230/50 - 10 W |
||||
Length (mm) |
1.800 | 2.000 | 2.200 | 2.300 | 2.600 |
Width (mm) |
800 | 800 | 900 | 900 | 1.200 |
Height (mm) |
2.300 | 2.500 | 2.500 | 2.300 | 2.500 |
Item No. |
197287 | 197288 | 197289 | 197290 | 197291 |
*Depending on the water temperature, the total hardness of the feed water and the flow rate