GREEN-LINE GEO + EDI 80, 150, 250, 450
Ready-to-install ultra-pure water unit, consisting of a reverse osmosis system with directly connected electrodeionisation for final demineralisation of the permeate. The system is fitted on a sturdy aluminium frame and is optionally available with cladding and a transparent inspection door. The system is controlled and monitored using a PLC with a touch screen panel. The most important process data (e.g. conductivity and flow rate) are available as analogue values for the central control room via PROFINET.
If requested by the customer, these systems can be equipped with options such as membrane degasifiers or sodium hydroxide solution dosage units.
|
Typ GEO + EDI |
80 | 150 | 250 | 450 |
|
Diluate capacity (l/h) |
80 | 150 | 250 | 450 |
|
Typical conductivity (μS/cm) |
< 0,2 |
|||
|
Efficiency/yield (%) |
70 | |||
|
Pre-filter |
10", 5 μm activated carbon filter | |||
|
Width (mm) |
1200 | |||
|
Depth (mm) |
800 | |||
|
Height (mm) |
1900 | |||
|
Feed water quality |
Soft water 0° dH, max. salt content 1,000 mg/l SDI < 3, chlorine content < 0.1 mg/l in accordance with the German drinking water regulations |
|||
|
Connection |
¾" | |||
|
Feed water pressure (bar) |
3 - 6 | |||
|
Operating temperature (°C) |
5 - 35 | |||
|
Electrical connection (V/Hz) |
230/50 | 230/50 | 230/50 | 400/50 |
|
Item No. |
321000 | 321001 | 321002 | 321003 |