GREEN-LINE analogue conductivity meter
The analogue conductivity meter is mounted on a T-piece (PP) and can be directly connected to all common cartridges. 5 LEDs permanently indicate the current operating status of the ion exchange cartridge. The conductivity meter has a measuring range of 0 – 30 μS/cm. A green LED on the intelligent “traffic light system” lights up after the cartridge begins operation, which then changes to yellow and then red as the cartridge is depleted, in order to indicate that the need to regenerate the cartridge is approaching.
|
Connection |
R ¾" |
|
Display |
analogue |
|
Measuring range (μS/cm) |
0 - 30 |
|
LED display stages/colours |
< 5/green, > 5/green, > 10/green, > 20/yellow, > 30/red, flashing |
|
Pressure resistant up to (bar) |
6 |
|
Max. operating temperature (°C) |
40 |
|
Power supply |
12 V DC using the wall plug transformer provided |
|
Power consumption (mW) |
< 500 |
|
Housing |
Polyoxymethylene, POM |
|
Electrodes |
Stainless steel 1.4404, seals 3 x EPDM 70 |
|
Measurement cell |
¾" male thread, POM, PN 6 |
|
Item No. |
340044 |
GREEN-LINE conductivity meter C 50
The GREEN-LINE C 50 analogue conductivity meter permits easy and precise conductivity measurement for permanent quality control of your pure water. The analogue display can be used to determine the quality at all times. It is installed directly on the ion exchanger.
|
Connection |
¾" |
|
Connection ¾" |
analogue |
|
Measuring range (μS/cm) |
0 - 50 |
|
Electrical connection (V/Hz) |
230/50 |
|
Item No. |
340074 |